Floor insulation and Vinyl

Trying to keep the floor as thin as possible for headroom, we used closed cell foam and vinyl flooring with the 1/2" plywood from Van Works. The sheets were shiplapped together.

Time: 8 hours

FarOutRide has a great diagram of layers. https://faroutride.com/floor-installation/


Parts:

• XLPE closed cell foam, 2 lb.
• https://www.foambymail.com/
• 2 4x6 sheets of 3/8" between the ribs
• 3 4x6 sheets of 1/4" glued to the back of the floor
• 3M 77 glue for the foam
• Lonseal vinyl is really great stuff, we got Madera Caramel
• https://lonseal.com/products/?f=SpecialtyVehicles
• Lonseal epoxy
• GE Silicone 2 - window and door

Note: We purchased the floor and epoxy online from Ameriteak

https://ameriteakstore.com/collections/lonseal-vinyl-flooring-options-that-can-be-installed-in-specialty-vehicles

Finally we put a bead of silicone around the egde of the floor to prevent water from getting under it.